The RX900 ENG Receiver has been distcontinued and replaced by the RX200.
RX900 ENG ReceiverRX900S Rear ViewRX900M Rear View
The RX900M (mono) and RX900S (stereo) are Digital ENG Receivers. They can have low power consumption and can be powered either internally with four AA Lithium batteries or externally with a 9 to 18 VDC power supply.
The RX900M can only be used with a mono transmitter, the RX900S can be used with either a mono or stereo transmitter.
Receiver Type: True Diversity Single Conversion Digital Demodulator
RF Modulation: Proprietary Digital Method
RF Frequency Range: 518.0 to 872.0 MHz (Typical Blocks are 36 MHz wide)
RF Frequency Step: 100 KHz
RF Bandwidth: US Mode
Channel Separation: 500 KHz (700 KHz recommended)
Sensitivity: -100 dBm
Antenna Connector: 50-ohm SSMA Female
Dynamic Range: 114 dB
DAC Bit-Depth: 24 Bits
DAC Rate: 48 kHz
Mic Audio Output Level: -40 dBm
Line Audio Output Level: -6 dBm
RX900M Audio Output Connector: XLR-3M (Mono)
RX900S Audio Output Connector: XLR-5M (Stereo)
Weight: 4.0 oz (113 grams) with Battery
Dimensions: 1.25″ x 3.25″ x 5.25″ (32mm x 83mm x 133mm)
Display: Graphic LCD Panel
External Power: 9 to 18 VDC @ 200 mA (150 mA in Power Saver Mode)
Internal Power: Up to 4 Hours (4 AA) @ 470 mA (350 mA in Power Saver Mode)