------------------------ Nomad Release Notes --------------------------------
NOTE: If nomad says "CANNOT BURN LESS THAN V7.10" you can install 7.99C
	and then burn the bootloader (v21) (ADVANCED SETUP menu) to fix it


!!!!!!!  WARNING for ZAXCONVERT USERS: DO NOT INSTALL LAME-3.99  !!!!!!
You MUST use LAME-3.97. If you install LAME-3.99 on your MAC you will 
need to remove it and then manually search your hard drive for 
any LAME related files and manually delete them before installing LAME-3.97.

NOTE: see the end of this document for a list of USB keyboard shortcuts.

---------------------------- Version History --------------------------------
---------------------------- Version History --------------------------------
---------------------------- Version History --------------------------------

8.14 Dec 30 2024
	Added support for Aria with 4 fader sidecar (12 faders) (16 faders is not supported on NOMAD)

8.13 Dec 23 2022
	Changed buttons on Aria:
		Track Routing button goes to CARD MIX 1-4 page
		Record Enables button goes to RECORD ENABLES page
		FADER ASSIGN goes to EXT FADER ASSIGN page or EDIT SCENE page 
		depending on the "Aria Fader Key" setting in the MODE menu

8.12 Dec 21 2022
	Fixed ARIA's STAR keys - now they go to the SETUP INPUTS page

8.11 May 4 2022
	Increased fader hysteresis to prevent AutoTrim from changing faders by itself on some Nomads

8.10 Feb 2 2022 ------------------------- 2022 -----------------------------
	Fixed headphone adjustment problem when using Aria

8.09 July 20 2019
	added ability to burn Oasis version 3.25

8.08 May 23
	Added "VFADERS = ON/OFF" in Mode menu
	Turn on Vfaders to allow them to effect returns
	If vfaders are on and another fader is assigned to return 1, for example, be sure 
	to set VFADER 1 to be centered on the -10dB hash mark to make the vfader be unity

8.07 May 18 2019
	Added support for remote power down of individual transmitters.
	
	To power down a transmitter press SETUP, choose an input associated with the transmitter that you want to 
	power down. Then choose REMOTE_PWR. This will display a page indicating which buttons to press.
		Press BUS  to send a WAKE UP command	
		Press STAR to send a STANDBY command (unit will reboot into STANDBY mode which draws about 25% power)
		Press PFL  to send a LOW2 command (unit will go into LOW2 mode which draws about 50% power)	

	This REMOTE PWR menu can also be accessed by pressing the ZNET button.
	This feature requires version 2.88 or higher in the body pack transmitter (does not work with units 
		that cannot accept this firmware like the LA2).
	This Feature should also work when using an IFB100 or IFB200 connected to the TC out of nomad (make sure 
	   ZAXNET_SETUP::ZAXNET_TC_OUT is turned on). 

	Currently the IFB200 cannot send these new commands from its front panel.

8.05 Feb 20
	fixed Delay On/OFF setting not really working
	made delays more efficient (might pop when enabling delays for second time)

8.04 Feb 16 2019
    reduced number of items stored in Deva.ini ROM file to prevent settings corruption

8.03 Feb 2 2019
    fixed super long timeout when booting up with an un-formatted primary card

8.01 Aug 8
	fixed bootloader so it does not prevent burning of 8.xx on newer nomads
	if nomad says "CANNOT BURN LESS THAN V7.10" you can install 7.99C
	and then burn the bootloader (v21) (ADVANCED SETUP menu) to fix it

8.00 Aug 8 2018 (BETA)
	Added support for Re-Record and Audition (feature from Deva24)
	Be aware that if you are starting and stopping your transmitters for each segment 
	during the day	and you have pre-record turned on, the transmitters will not have
	the first 10 seconds or so of audio so they will not be able to find the playback audio
	unless you first "scrub" into the seg to get past the pre-record time.
	It is best to leave the transmitters in record all the time if you are using pre-record.

	In the PlayBack page press * to go toggle to the Audition/ReRecord page
	when in this page, after selecting the playback segment,
	you can then press the following keys

	PRESS "REC" 
	to go into record while playing back from the transmitters. 
	the NOTE field will contain the timecode offset that post needs to add to move this segment 
	to the proper place in the timeline to replace the originally recorded seg (frames are always zero).
	Then press STOP to stop the Nomad recording and the transmitters
	To try again be sure to re-select the current playback seg 

	PRESS "PLAY"
	to audition which means the transmitters will just playback their audio starting 
	at the current play seg's timecode (userbits must match the transmitter's userbits of this seg)
     
	press STOP to send a STOP command to the transmitters

	press SETUP to send a RECORD command to the transmitters when you are done with this page

                             
7.99A Jul 25
	fixed problem with formatting Primary card
	fixed potential problems with creating some files on CF card
	fixed possible problem with changing mirror folders 
	added (!) to mirror status line if mirror folder and primary folder are not the same

7.99 July 24 2018 (DO NOT USE)
	added automatic mirror metadata update so changes to scene,take,note are 
	automatically written to WAV files as long as mirroring is activated

	fixed problems with Playback PFL when external faders are assigned to digital inputs

7.98  May 15 2018   (RELEASE)
	this is the same as 7.97T

7.97T Feb 16 2018   (BETA)
	reduced processor speed to prevent crashing on some nomads

7.97R July 19 2017  (RELEASE)
	Fixed problems with Transcend 400x UDMA 7 cards not mirroring properly
	increased mirroring speed by 20%                                           

*** Warning: versions below this line may have difficulty reading newer CF cards.    ***
*** This could result in clicks in your mirrored WAV files.  If this happens run     ***
*** Zaxconvert or upgrade to 7.81A or 7.97R and then re-mirror the files.            ***
*** The CF card drivers were upgraded to account for changes seen in newer CF cards. ***

7.97M May 2 
	fixed problems when assigning FP8 faders to Zaxnet trims

7.97K Mar 7 2017
	allowed Zaxnet Gain to go all the way to maximum of 52dB

7.97J Jan 20
	fixed primary card not being formatted correctly such that ZaxConvert would not work

7.97H Jan 17
	fixed zaxnet TXID frequencies being off by one in SETUP pages vs ZNET pages

7.97G Jan 12 2017
	fixed faders being at unity when booting up 
	changed "mute" area of the fader so it is not at 9 O'clock, now its 8 O'clock.

7.97F Dec 7   (BETA) --- THIS VERSION DOES NOT SUPPORT MP3 or VIRTUAL FADERS ---
	copied FOLDER CHANGE in mode menu to 'FOLLOW PRIMARY' in mirror settings menu
	This forgotten setting allows mirror folder to follow primary folder setting
		
7.97E Dec 7   (BETA) --- THIS VERSION DOES NOT SUPPORT MP3 or VIRTUAL FADERS ---
	fixed fader #6 not being remembered after a power cycle
	removed MP3 support for now
	removed USB drive support for now
	fixed sound report generator (caused error if folder already exists)
	allow sound report to be generated when mirroring is ON

7.97D Nov 17  (BETA) --- THIS VERSION DOES NOT SUPPORT MP3 or VIRTUAL FADERS ---
	prevented popup window from removing key presses 
	fixed destruction of trim values when passing thru fader assigns in EXT FADER ASSIGN page
	fixed FP8 faders not being updated on boot up sometimes (required fader nudge)

7.97C Oct 19  (BETA) --- THIS VERSION DOES NOT SUPPORT MP3 or VIRTUAL FADERS ---
	fixed new problem with mirroring not knowing when the disk is full

	replaced entire FAT32 file system to prepare for ability to seamlessly update changing metadata
	
	fixed internal fader assigns not being remembered after power cycle 

	added display of last sent ZNET unit code: displayed on home screen line #3 as "Zxx"

	Made "Z" in fader assign page represent which audio channel is assigned to the fader instead
	of which zaxnet ID. The Zaxnet ID is determined by TXID setting in input setup menu now
	so any zaxnet ID up to 30 can be chosen without the previous limit of zaxnet ID's 1-8

	Reduced maximum allowed gain of transmitter to 70% when assigned to a fader so its not so touchy
---------------------------------------------------------------------------------

7.94 Sep 29
	fixed settings problem where many settings were not being remembered after a power cycle (compressors)

7.92 Sep 28
	new Oasis program: v3.14 to allow RX12 to work with Oasis properly
	reduced size of pop-up window

7.91 Sep 14           
	Nomad now allows multiple trims and inputs (up to 6) to be assigned to one fader
	Nomad now allows trims on external faders
	Nomad now allows zaxnet gain control on external faders
	fixed input compressor not being set to Group A,B,C mode 
	fixed FP8 off by one LED bug

7.90 Jun 29
	fixed Headphone2 PC's GUI page not working
	fixed problems with inverted crosspoints on PC's GUI

7.89 Jun 3
	Fixed COM (talk1) not working
	Changed COM (talk1) to use outputs instead of card tracks
	Fixed Slate and COM enables not being remembered after a power cycle possibly
	Made Oasis output gain knob travel smoother on Oasis
	
7.88 Jun 2
	made output gain knob travel smoother on Oasis

7.87 May 26
	fixed a fader refresh problem when changing banks so you 
	don't have to nudge a fader to make it active
           
7.84 May 25
	Fixed PFL bug on Oasis - digital PFL did not work 
	Changed playback PFL to look for an ISO track that is associated with the PFL's fader's input.
     For example, if FADER #1 is assigned to INPUT 5 and INPUT 5 is recorded on TRACK 6,
     pressing PFL#1 will listen to playback track 6 (previously PFL#1 would listen to playback track #1).

7.83 May 24
	**** Re-wrote entire fader assign system to fix bank switching problem with Oasis ****
	At the moment trims and zaxnet cannot be assigned to an external fader
	Be sure not to assign two faders to one input channel
	WARNING: the soft (virtual) faders have been disabled for now

7.81 Apr 13
	prevented Mix8 from timing out to prevent problems with hub software

7.80 Mar 16
     fixed input delay from forgetting its On Off setting after power cycle
     prevents presence of FP8 or Mix8 from letting nomad know if PC has been disconnected
    
7.78 Dec 12 
	fixed advanced meter settings being off by a factor of 100
	check for PC more often if no PC connected to insure PC catches this when cycling thru com ports in AUTO mode
	print "load PC settings" pacifier on PC status line what starting up PC GUI
	prevent meters update if PC settings were just sent

7.77 Nov 30  (for use with PC version 0.85.0 thru 0.86.x)
	added shortcuts to Oasis for use when no PC is connected...
	Press Oasis BUS channel strip key to go to the OUTPUT BUS ASSIGN PAGE
	press Oasis STAR channel strip key to go to the CARD TRACKS 1-4 screen.
	press Oasis STAR again to go to CARD TRACKS 5-8 screen etc
	press Oasis AUX to emulate the BUS key on nomad's front panel to change to other card track pages
	added support for digital input shortcuts when using Oasis' channel strip keys
	made Oasis "+" key go to home page on GUI (and meters page and main menu page if using Oasis GUI)

7.76 Nov 25
	fixed Input trim not being set on Nomad when adjusting it from PC

7.75 Nov 24
	added some delays when sending all data to tablet so a slow PC can catch its breath 
	fixed Mix8 meters

7.74 Nov 23
	Oasis v3.13: Engaged write protect on ROM
	Fixed Oasis burning procedure that would cause the Oasis to become permanently 
	disabled if programming was interrupted for any reason or at any point in time.

7.73 Nov 20
	Better MP3 recording on PC version 0.86.1

7.72 Nov 17
	fixed RX12 not working when directly connected to nomad

7.71 Nov 12
	fixed setup pages not displaying proper meters when changing to different inputs

7.70 Nov 10
	fixed protocol warning if Nomad and PC do not match 
	fixed input phase not being updated until trim changes
	fixed PC's input meter
	fixed USB keyboard not working properly in INPUT SETUP page
	compensated for 2 frame LCD lag in Slate display
	compensated for 2 frame TC GUI lag in PC's Slate display
	fixed Nomad crash when mirroring and going into Setup menu while Touch is connected


7.69        
	fixed Sound Report not having proper file name type
	fixed IsoAttenuationTrackEnables not setting channels 9-12 properly
	fixed IsoAttenuationTrackEnables not being sent to PC when adjusted on Nomad
	fixed IsoAttenGain not updating the attenuation levels of each track
	added SlatePageBeepDelay in advanced menu

7.68 Nov 2
	Changed HP Phase names from NORMAL and REVERSED to LEGACY and DEFAULT
	so we can change the default phase setting of the headphone output
	which was phase revered with respect to the inputs all this time
	We now store software version whenever doing a factory recall defaults so 
	we know how old the settings are in the future

7.67 Oct 29
	fixed Mono and Tape out not remembering their gain setting after a power cycle

7.66 Oct 29
     fixed Nomad and PC not being able to communicate on boot up if PC is slow
	added MuteFrame1TCtest in ADV menu for testing timecode - mutes frame 1 of 
	  TC output so you can see it in a WAV file when TC is recorded
	prevented meter label from containing a single space - caused a "+" character to show up on PC
     
7.65 Oct 21
	fixed Input Levels menu not working for Return 2,3,4, and digital inputs

7.64 Oct 20
	fixed zaxnet trim assigns on front panel of nomad
	allowed track name colors in GUI to be saved by Nomad
	fixed strange "+" character showing up when deleting a track name preset
	fixed problem with cycling power on Oasis causing lack of communication
	added Oasis burner firmware version 3.12 which fixes
	problem when cycling power on Oasis while Nomad and PC are still running

7.63 Oct 20
	Fixed digital inputs disappearing from card mix after power cycle

7.62 Oct 19
	fixed random extra character on the end of Nomad's Model Name

7.61 Oct 19
	forced HPmix button on GUI to wrap around at 12
	prevented possibility of seeing Digital 9,10 on Input Setup page
	fixed track name and track name preset not being sent to PC
	allowed editing of Headphone Mix name via PC GUI

7.59 Oct 14
	added support for digital input setup pages (press STAR key to toggle Digital mode)
	added fader bank setting in External Fader assign page
	fixed digital gain update problems

7.58 Oct 13
	prevented INI.cpp from reading impossible non-existent digital 
	  input assignments to card tracks (d8,d9)

7.57 Oct 10
	fixed mix8 meter ordering bug
	fixed RX12 support
	limited MAX_OUTPUTS to 6 (4 for card tracks) in DEVAMIX.INI
	included FAD-311.h for Oasis firmware burning 

7.56 Oct 7
	Fixed External Fader Assign problem
	
7.55 Oct 7
    added TxID to InputSetup page so inputs can now be associated with transmitters
    fixed recent FP8 problems.
    checked Mix8 compatibility
    changed how HighPassFilter settings are saved in some places
    GUI: fixed PanFollow and MP3 Record Mode remembering after power cycle

7.52 Oct 5
    GUI: fixed 1 too many metadata entries from being displayed in GUI's metadata list page

7.51 Oct 5
    fixed new metering problem where levels would show up that should not
    added memory for MetersCount on Touch and Oasis GUI

7.50 Oct 2
	saved fader bank positions to RAM for instant storage and recall on boot up

7.49F
	Oasis Firmware burning works (advanced menu)

7.49d Sep 28
     fixed a number of problems with PC GUI in InputConfigure page
	GUI: fixed problems with PC GUI's  PAN assign
	GUI: fixed mono mix
	GUI: fixed pan problems 
	GUI: fixed jam tc,ub,date,time
	GUI: fixed 48v,delay,notch,hpf

7.49a Sep 8
	increased CF card reliability for speeds faster than FAST1

7.48W Sep 6
	added EXTernal PC GUI meter Decay in ADVsetup menu 

7.47 aug 25
	 Fixed Mix8 and FP8 not working
	FIXED HeadPhone clipping problem 
	fixed playback meter problems

7.45 Aug 1
	made changing samples rates down back to 48kHz more reliable
	added experimental 96096 sample rate mode

7.44 Jul 8
	replaced "File xx of 999" with "File xx" of yy" on mirror status line
	Added scene and take display on status line #3
	Added transport control in MetaData page

7.41 Jul 6
     Fixed bug where nomad crashes when changing RECORD ENABLES
     
7.40 Jul 4
	fixed serious problem with mirroring where mirrored file could close too soon if mirroring is very fast
	this tends to happen when mirroring only 1 or 2 channels  

7.39 Jun 24 *** DO NOT USE - mirror bug***
     Current Folder is now stored in battery backed RAM instead of Flash ROM
	Fixed (again) Current Folder changing when loading a preset
     
7.38 Jun 23 *** DO NOT USE - mirror bug***
	Added Multi-Trim in the Mode menu - allows assignment of multiple trims on 1 fader

7.37 Jun 19 *** DO NOT USE ***
	Modified mirror LED to only come on when mirror card is being written to
	Changed threshold at which unit will kick out of record when disk is full
	Prevented selection of Fast2 or higher if Main REV is less than 57
	Increased max files size by 7 percent: from 2e9 to 2,140,000,000 bytes

7.36 Jun 18 *** DO NOT USE - mirror bug***
	Fixed (Note: this is not fixed) problem when loading presets. FolderNum was corrupted	

7.35 Jun 8     (BUG: Current Folder can be random when loading presets!)
	prevented ERX TC DELAY menu from getting stuck at zero

7.34 Jun 6     (BUG: Current Folder can be random when loading presets!)
	Current Primary Folder will no longer change when loading a preset 

7.33 Jun 6
     fixed serious mirror problem introduced in 7.31
     
7.32 Jun 4 ((((DO NOT USE)))))
	prevented ERX remote delay setting from going above 400ms
	allowed numeric entry for ERX remote delay (and some other menus that had this bug)
	added pop-up warnings when setting sample rate

7.31 Jun 4 ((((DO NOT USE)))))
	added support for new DSP speeds: FAST2,FAST3,FAST4 in Advanced Setup Menu (test before using these on a job)
	New boot key: hold REC key during boot to force 48kHz sample rate

7.30 Jun 1-3
	added support for changing ERX audio delay setting remotely via Nomad Zaxnet Setup menu
	fixed problem with status messages not showing up if Allow Logging is off (for example when creating a sound report)

7.29Q Apr 28
	possible fix for Continuous Mirroring sometimes not mirroring all files or pausing until the STOP key is pressed

7.29P Apr 8
	fixed blue trim dot on card tracks being shown when track is not an ISO track (sometimes)
	fixed loud noises when changing Input Configure mode
	
	support for new "Audio Rev 15" hardware PLD modification (see the About screen) 
	  which allows all AES inputs to work with IFB turned on:

	New Input Config mode 13: 
	 AES 1-8    ON
     NeverClip on Input 1,2 only
     Return 12  OFF
     Return 34  OFF 
     Analog 56  ON 
     IFB Input  ON 
	
	New Input Config mode 14: 
	 AES 1-8    ON
     NeverClip on Input 1,2 only
     Return 12  ON
     Return 34  OFF
     Analog 56  OFF
     IFB Input  ON


7.28T Jan 21 2015
	experimental version to allow multiple trims one a single fader

7.28 Dec 22
	fix for folder names that are 9,10,11 or 12 characters long showing up prefixed with a ~ on the mirror card

7.27 Dec 20
	fixed some problems with sound report and mirroring when using long folder names

7.26 Nov 12
	fixed timecode display inaccuracy on SLATE page
	fixed timecode zero frames beep inaccuracy on SLATE page

7.25 Oct 30
     added command to refresh fader info every 2 seconds for FP8

7.24 Oct 28
	Added support for RX12 Zaxnet commands from the serial port

7.23 Oct 24
	Fixed problem with FP8 sometimes grabbing an AutoTrim LED away from the Nomad's Faders

7.22 Oct 2
	Fixed MP3 not working

7.21 Oct 1
     USB keyboard:  Made "Q" key act like the ESCAPE key for use by tiny keyboards
	Fixed problems with assigning trims to external faders not being remembered after power cycle     

7.20 Sep 25
	text change: BOOT JAM DATE is now AUTO DATE JAM

	change to fix strange behavior like outputs not working sometimes

	fixed bug where if you exited a text editor screen using the USB
	keyboard's HOME key, the ENTER key would not longer work after that

	fixed PFL not remembering which PFL was last being used
	fixed External faders that were assigned a Trim not remembering after a power cycle

7.16 Sep 10 ** DO NOT USE **
	Increased Folder Name size to 20 chars - untested
	Added another file name mode which has no underscore before the take. "/z001/1T2" 
     Added new file name mode: "foldername/scene_take.wav" this mode allows the user to create duplicate file names!!!!!
     Take metadata is now appended with a,b,c,d... when super long takes are automatically created (instead of appending the dash character)
     
7.11 Aug 19 
	added HP phase Change option which inverts the phase of the headphone
	added HP extra Gain which allows the user to decide if wants the extra gain in the headphone (which allows clipping)
	added clipping protection for headphone output

7.10 Jul 30
     END key now goes to the end of a page 
	support for new ROM chip
	new bootloader V20 for new ROM chip
     
7.06 Jul 30
	<< and >> keys (BUS and PFL) change playback segments in playback page (again)
	On external keyboard the comma and period keys do the same as the << and >> keys 
	in this page and the 
	Left bracket and Right bracket keys ( [ and ] ) control the SCRUB functions in the playback page
	Allowed FP8's STOP key to go to FALSE START page like the regular STOP key does

7.05 Jul 29
	fixed bug in ENTER TC and ENTER UB menus where user could not exit without a power cycle
	added support for CHANNEL and GAIN INC/DEC to send out Timecode port

7.04 Jul 25
	Added MetaData page shortcut option to F1 key on FP8
	Added ZAXNET output to Timecode option in Zaxnet Setup menu (experimental)

	Added "Lock USB Keyboard" sequence
		CTRL ALT DELETE = toggle lock/unlock
		CTRL ALT L = Lock
		CTRL ALT U = Unlock

7.03 Jul 24
	made PFL look for assignments on external faders if nothing found on internal faders

7.02 Jul 22
	fixed BootJamDate option not being remembered after power cycle

7.01 Jul 17
	Fixed AutoMixer not working (the bug appeared in 6.48)

7.00 Jul 16
     Added USB keyboard support for NOMAD 12            
     
      USB keyboard must be plugged in before power up (or soon after boot up)
      A USB hub may be needed to get some keyboards to work
      USB keyboard cannot be used with USB mirroring (you must set Mirror mode to CF)
      About 15 seconds after power up the text "FOUND USB KEYBOARD" should be displayed on the home screen

	Fixed Nomad not sending proper "Change FrameRate" command to Zaxnet IFB module
	Fixed "Play To Outputs" setting in ENG Setup menu (prevents playback from showing up on outputs)

	Fixed zaxnet trim not working for zaxnet unit codes 17 and 18

	Swapped position of Trim and Frequency in Zaxnet pages to make trim adjustment quicker
	Allowed ZERO key on USB keyboard to select analog10 or zaxnet10 

	Added "BOOT JAM DATE" in TC SETUP menu (will jam the date into the userbits on boot up every time)
	Changed Auto Mixer to allow its output compressor to work

	'Ctrl F1' = toggle MP3 mode (like AMIX key)
     'Ctrl R', = (TRANSPORT_REC) 
     'Ctrl S', = (TRANSPORT_STOP) 
     'Ctrl P', = (TRANSPORT_PLAY)
     'Ctrl T', = (TRANSPORT_TONE) 

    'Ctrl C', = 'KEY_COM'     
    'Ctrl L', = 'KEY_SLATE'   

    'Ctrl +', = Increment AutoPan,  only allowed in home screens
    'Ctrl -', = Decrement AutoPan,  only allowed in home screens

     '*'  acts like STAR key
                         
     'F1', 'T',   TC KEY
     'F2', 'A',   AMIX KEY
     'F3', 'Z',   ZAXNET KEY
     'F4', 'B',   BUS KEY
     'F5', 'P',   PFL KEY
     'F6', 'S',   SETUP KEY
                                      
    'F7', 'Alt S', = 'metadata.scene'  (needs work to avoid confusion)
    'F8', 'Alt T', = 'metadata.take'   (needs work to avoid confusion)     
    'F9', 'Alt N', = 'metadata.note'   (needs work to avoid confusion)     

    'HOME KEY', = 'HomeScreen'   
    'M',        = 'MainMenu'     
    'H',        = 'Headphone1'   
    'Alt H',    = 'Headphone1'   
    'Alt E',    = 'RecordEnables'    
    'Alt M',    = 'MainMenu'     
    'Alt K',    = 'TrackNames'   
    'F10',      = 'TrackNames'   

    'KEY_GT',   = HeadPhone memory Increment   '>' GreaterThan KEY
    'KEY_LT',   = HeadPhone memory Decrement   '<' LessThan KEY

    ARROW KEYS move cursor in menus and matrices
    
    KEY_PAGEUP    = increment thru home page variants 
    KEY_PAGEDOWN  = decrement thru home screen variants
      
   CTRL+'1': act like Nomad Front panel PFL system
   CTRL+'2': ""     ""
   CTRL+'3': ""     ""
   CTRL+'4': ""     ""
   CTRL+'5': ""     ""
   CTRL+'6': ""     ""
   CTRL+'7': ""     ""
   CTRL+'8': ""     ""
   CTRL+'9': ""     ""
   CTRL+'0': ""     ""
   
   ALT+'1': act like FP8 PFL keys
   ALT+'2': ""   ""
   ALT+'3': ""   ""
   ALT+'4': ""   ""
   ALT+'5': ""   ""
   ALT+'6': ""   ""
   ALT+'7': ""   ""
   ALT+'8': ""   ""
   ALT+'9': ""   ""
   ALT+'0': ""   ""


6.47 Jun 26
	No longer light up all trim knobs since AutoPan
	 really needs a <single> active fader indicator to avoid confusion
	 
	Allowed COM key to still activate auto pan even when FP8 is connected
	Added FP8 shortcut key (F1) assignment in MODE menu
	Added trim modes to External Faders (not for use by Mix8)
	Allowed FP8 and MIX8 to work with a Nomad LITE model

6.43 Jun 23
	fixed extra External Zaxnet fader assign and Digital assign on LITE models
	disabled "OVERLOAD" warning popup 
	
6.42 Jun 19
	Added "Play To Outputs" menu in ENG SETUP to prevent playback audio from coming out the output XLRs

6.41 Jun 18
	made PFL keys on FP8 change Zaxnet number after pressing ZNET button

6.40 Jun 16
	fixed date on mirrored files so DATE_CREATED is now the same as DATE_MODIFIED 
	changes to how PFL routing is determined based on fader assigns and trim assigns (when in PFL routing mode)

6.39 Jun 12
	fixed AutoPan display text from displaying the wrong AutoPan text for digital pans
	added underline in PFL text to indicate FP8 vs. regular fader PFL
	fixed Auto PAN. it was not supporting digital inputs properly
	made auto trim LED stay lit if you touch a fader that is not assigned
	made FP8 LED brightness match the Nomad's trim LED brightness setting

6.36
	dis-allowed remote GPI input mode if a MIX8 or FP8 is connected
	changed MIX8 mode menu to be ON or OFF rather than ANALOG or DIGITAL
	Note, Mix8 mode menu does not really effect anything now - it should be automatically detected.

6.35 Apr 5
	FP8: Fixed PAN key on FP8 
	FP8: press PAN to go forward, hold PAN to go backward
	FP8: press F1 to jump to the Mirror Settings menu

6.34 Apr 30
     Warning: when going from this version to an older version you may need to do a "Factory Recall Defaults" or a "Clear Faders"...

	Fixed "off by one" error in mix8 trim knob checking
	added new external fader assign page that is not matrix based
	zaxnet trims on FP8 now start at TRX unit code 11 for external fader#1
	added zLastUnit in Zaxnet Debug screen to indicate the unit code of the last gain command that was sent via zaxnet

6.32 Mar 31
	fixed Zaxnet trim assigns being off by one fader number in EXT Fader Assign page
	added delay to Znet trim so user can pass by a "Z" in the fader assign page 
	  without immediately blowing out a transmitter's zaxnet trim setting accidentally

6.31 Mar 25
	fixed LED for external Fader #1 not working

6.30 Mar 18
	fixed Mix8 trim modes for Mix8 trim knobs 
     made a number of changes to trim handling
6.28 Mar 10-14
	fixed auto trim selection for ext faders
6.27 Mar 10
	added External Fader Assign menus for Mix8 and FP8 control surfaces
	fixed Auto Trim for digital case
     fixed Auto Trim for digital ISO channels
	fixed super slow trim update problem for digital input trims
	fixed missing trim diamonds for digital inputs
***** Note that the virtual fader page is always active so when assigning a 
***** front panel fader to a return or AES input you need to set the virtual fader 
***** to something reasonable (close to unity gain).


6.23 Feb 8
     Allowed IFB frequency to go down to 2403 instead of 2404

6.22 Feb 7
	added AutoPan feature 
	(touch a fader then press COM key in any home screen to pan)
	fixed bug where outputs 1-6 and tape/mono were inverted 

6.21 Feb 6
	added card meter trim diamonds

6.20 Jan 7
	added new (bootloader v17) for new LCD 

6.19 Jan 7 2014      ------ 2014 ------
	added extra slate gain to UI (up to 60 dB)

6.18 Dec 9
	smoothed trim adjustment at higher trim settings

6.17 Nov 21
	fixed missing AES outputs on LITE model

6.16 Nov 19
     Fixed some timing oddities that could cause INIT AUDIO to display repeatedly on boot up
     Made changes to fix mirroring from not completing all the time (use NORMAL SPEED mode).
	Prevented FAST2 speed (for the moment) 

6.15 Nov 6   
	** NEW FEATURE ** When in PLAYback mode, if a Headphone Preset exists 
	called "PLAY" the unit will automatically switch to that preset and 
	switch back when Stopped.

6.14 Nov 5
     fixed bug in AutoMixer that could cause buzzing sound

6.13 Oct 4
	fixed Extra Input Gain setting in Input Levels screen (it was adding 20dB instead  of 10dB)

6.12 Oct 4
	mute Zaxnet RX audio when PFL is active
	fixed Virtual Fader operation on ENG home screen

6.10 Sep 30
	*** found AutoMix click sound when Noise Reduction is set to 1,2 or 3 dB ***
	added some more attack and decay softness


6.08 Sep 14
	fixed AES output status bits for all AES outputs

6.07 Sep 13
	fixed attack and decay settings in automixer to prevent distortion at settings below 20ms
	collapsed ENG SETUP menu to the way it used to be
	fixed erroneous "48V not allowed in Line Level" warning when changing from mic to line

6.06 Sep 12
	added track name and Note presets (press PFL to open preset selection page
	when you have highlighted (in blue) the Note or Track Name that you want to edit)
	HOLD stop KEY on BOOT UP to do a full FACTORY RESTORE
	a regular factory restore will not erase the Note and Track presets

6.05 Sep 9
     fixed card meters not displaying compressor meter in the home screen containing both output and card meters

6.04 Sep 5
	fixed NeverClip distortion when using high pass filter on inputs

6.03 Aug 30
	added force SLATE menu in advanced menu (resets to NORMAL after power cycle) 
	this forces the slate mic on all the time for trade shows and demos

6.02 Aug 30
     fixed AutoMixer clicking sound when using fast attack times
	added output enables for AutoMixer
     
6.01 Aug 21
     restored older 2 output / 6 input home screen when AutoMixer is off (for trim calibration)
     added check in trim calibration mode to make sure proper home screen is active
    
6.00 Aug 20  ** AUTOMIXER **
	fixed Mic-Open indicator on meter not working for input 4 and higher
	added virtual fader support for AutoMix home screen when Inputs 7,8,9,10 are enabled in AutoMix
	removed MIC OFF THRESHOLD and forced it to be (MicOnThresh-10dB) all the time
     removed ENG setup menu and added it to end of Main Menu
	A-mix key goes into AutoMix screen (instead of MetaData) if AutoMix is already enabled
	added "A" symbol by meter to show which channels are enabled for AutoMix
	added more meters on input page depending on weather auto mix is enabled for various returns or digital inputs

5.25 Aug 8
	allowed ZNET frequencies of less than 520MHz

5.23 Aug 6
     added Input Trim calibration mode in Advanced menu

5.22 Jul 20
	added new CF card driver changes for more compatibility

5.21 Jul 5
     flush pre-record buffer when pre-record time is adjusted
     brought in some misc. changes from MAXX
     added popup when trying to set 48V on a line level input

5.19 Jun 12
	AES fix for Nomad muting AES inputs when fed by an older Rev B DEVA

5.17 May 5
	fixed HP ENABLE button getting set when you set a crosspoint in HP2 and TAPE/MONO page

5.16 Apr 22
	Added moving pixel on bottom of screen to indicate that the Nomad
	must not be powered down before non-volatile settings are saved
                         
     Prevented a period in Scene text from corrupting mirrored WAV file names
     
	Prevented *B1 warning when mirroring across a super cluster boundary
	
	Increased CF card timeout from 1 second to 1.7 seconds

5.15  Apr 17
	Added a Warning Log Screen in Advanced Setup (you must turn on Logging first)
	more timing changes to help certain Nomads

5.14 Apr 1
	Removed analog fader assignments in Mix12map that assigned 
	Mix12 faders 9-12 to A1-4 which conflicted with typical MIX8 setup

5.13 Mar 28
  fixed digital fader assignment being stuck on after adjusting Fader Assign
  (required reboot to fix it)

5.12 Mar 21
     miscellaneous timing changes
  
5.11 Mar 11
  removed output mix onto disk bus feature.
  output assigns to card tracks now block everything else assigned to 
  that card track (like it used to). 

5.10 Mar 8                                                                 
  fixed bug in Output Levels screen (XLR and TA5 would not adjust properly)

5.09 Mar 5
  fixed slate not working on card tracks that have outputs assigned to them
  Nomad now mixes outputs to card tracks instead of routing to card tracks
  which prevents other items that were assigned to the card track to be removed
   
5.08 Mar 5
  fixed TAPE/MONO HP2 settings from not loading in on boot up (broken in 5.06)

5.07 Mar 2
  fixed some more items that could cause a crash
      
5.05 Feb 28 
  fixed new USB mirroring bug (mirror abort)    
  
5.04c Feb 26 
 timing changes

5.03x Feb 26 
 fixed random mirror freeze when using USB to mirror large files
 
5.02 Feb 20
  Start Segment was not getting set to 1 when formatting mirror drive

5.01 Feb 18
  fixed freeze when trying format some blank Primary cards

5.00 Feb 12
  name change to 5.00

4.59 Feb 8
  Zaxnet processor: NOPT 0.36: 29.97 drop frame fix (did not seem to need it)

4.58 Feb 5
  Fixed MP3 state icon being turned on when pressing RECORD

4.57 Feb 5
  Added MP3 mirror state toggle using STAR KEY in MetaData page
  In MetaData page changed "NEXT SEG" text to "CUR SEG" when in RECORD mode

4.56 Feb 1
  Added MP3 multiple card track selection (in MODE menu)
  Fixed SERIOUS problem when trying to use MP3 on a card that 
      was not formatted using MP3support=ON
      Remember MP3support MUST be ON while formatting a PRIMARY card
      for MP3 to be allowed on that card in the future!

4.55 Jan 29
 fixed wasteful double screen draw on home screen
 fixed MONO mirroring bug that only mirrored first segment
 fixed inverted crosspoint mode (which is toggled by STAR key)

4.54 Jan 24
 fixed / changed how inverted crosspoints are made with STAR key 
 added Headphone inverted crosspoints option using STAR key
 added MP3 indicator icon to ALL home screens

4.53 Jan 24
 moved MP3 toggle from BUS key to AMIX key
 AMIX still takes you to metadata page if MP3support is OFF

4.52 Jan 22
 added reset to EncoderCounter if it looks like it jumped

4.51 Jan 21
 added MP3 mirror toggle using HOLD-BUS KEY 
 added MP3=ON text on home screens that have lots of extra room

4.50 Jan 11
  Added MP3 SUPPORT menu in MODE menu (note BitRate needs to be chosen BEFORE you record any segments)
  NOTE: MP3 audio only supports audio on card track #1 for the moment!!!!
  added PROCESSOR SPEED in advanced settings  normal, fast, fastest (to make mirroring faster)
     (a reboot (after at least 3 seconds) is required for the speed setting to take effect)
  restricted MP3 to not allow CONTINUOUS mirror mode
  removed redundant Mirror Drive setting from Mirror menu
  added ExtraInputGain in INPUT LEVELS screen which effects inputs 1-6 only
  increased speed of encoder movement 

4.45 Dec 15 
  fixed ENG home screen fader feature(broken in 4.44)

4.44 Dec 13(15)
  renamed DEVAPROGFILE.BIN on primary card to PRIMARY.BIN  since it is useless
  added new CARD home screen with 2 output meters

4.43 Dec 13
  Allowed 3.xx software's NOMAD_10 enable code to work without having to re-enter it
  Prevented LEDs from coming on when AutoTrim is turned off

4.42 Dec 12
  fixed reversed External Slate gain setting
  prevent user from storing settings to mirror card when mirror=ON
  added mirror pop-up warnings to other operations as well

4.41 Dec 11
  Fixed bug that caused a poss ability of zero-length WAV files when mirroring 
  This bug effects 4.33 - 4.40 inclusive.

4.40 Dec 10  ----- DO NOT USE ------
  fixed possible clicks in audio
  
4.36 Dec 10  ----- DO NOT USE ------
  Fixed Factory Defaults for Nomad LITE which used 
   post fader card track assignments which are illegal in a LITE

4.35 Dec 10 ----- DO NOT USE ------
  Stopped debug messages from using RS422(MIX8) port to prevent conflict with GPI and MIX8

4.34 Dec 10 ----- DO NOT USE ------
  Moved ISO attenuation so Card limiters act at the correct threshold when ISOatten is active

4.33 Dec 9  ----- DO NOT USE ------                                                                        
  Prevented USB debug messages from being seen on screen sometimes
  Prevented automatic punch-in from incrementing TAKE (appends a "-" on takes over 2GB)
  Allowed USB status to see how much data is being used up on USB drive in real time
  
4.32 Dec 7
  made many changes to fix crashing and mysterious encoder knob activity on some Nomads
  PLAY key is aliased "MetaData Screen" 
  fixed possible bugs with compressors 
         
4.25 Nov 26 ----- DO NOT USE ------
  fixed problem that caused long WAV file names to not be seen by some operating systems
  (this bug effects 4.23 and 4.24 only)

4.24 Nov 24 ----- DO NOT USE ------
  Forced proper Mix8 restriction of which fader values are accepted (output gains)
  fixed missing write of Mix8 fader assigns to memory when mix8 is selected

4.23 Nov 21 ----- DO NOT USE ------
  fixed the reading of Mirror settings file from CF card
  New Boot loader V15 - fixes problem with Transcend 16GB cards when burning a program
         
4.22 Nov 21 
  Removed "No Mirror Media" message when unmounting volume to prevent confusion

4.21 Nov 20
  Changed problematic playback behaviour of Headphone#2 and Tape/Mono bus

4.19 Nov 20
  Fixed primary card timeout problem on boot with some cards

4.18 Nov 19  ----- DO NOT USE ------
  Fixed playback routing issue on HP2 and TAPE/MONO outputs

4.17 Nov 16  ----- DO NOT USE ------
  remapped CARD MIX pages to allow all inputs on any card bus
  moved TONE ENABLES page to BUS menu
  added SLATE ENABLES page to BUS menu
  added COM ENABLES page to BUS menu

4.15 Nov 14   ----- DO NOT USE ------
  fixed auto-trim jumpiness when a fader is assigned  as a Zaxnet control

4.14 Nov 13   ----- DO NOT USE ------
  Misc changes
  Fixed problem with HighPass filter on ch 7-10 if turned on they mess
    up mic/line settings on ch1,2
 
4.10 Nov 8  ----- DO NOT USE ------
  Prevented loud noise when using IOconfig=7

4.09 Nov 7  ----- DO NOT USE ------
  More changes to prevent strange behavior


4.07 Nov 7  ----- DO NOT USE ------
  fixed "Recall Settings From Mirror Card" bug: did not recall any of the MIRROR settings
  May still need work on this feature

4.03 Nov 6  ----- DO NOT USE ------
  fixed "Nomad Lite" text in About Nomad Screen
  fixed record routing problem with NOMAD_LITE model
  fixed ratio limiting bug to 4.00
  changed how "rec time" and "seg time" are displayed on home screen
  changed all LIMITER text to COMPRESSOR
  added boundary checks for all compressor settings

4.02 Nov 2  ----- DO NOT USE ------
  fixed output/card compressor enables not being remembered
  added "ENABLE" box in HP preset menu to allow the user 
  to disable non-empty HP presets when cycling thru them in a home screen

4.01 Nov 1  ----- DO NOT USE ------
  added Elapsed Recorded Time display on home screen "Seg 23 (0:11:22)"
  fixed loud noise on inputs when using certain InputConfig modes
  fixed problems with formatting a mirror card
  fixed bugs when storing / reading compressor settings

******** 4.00 Oct 25 2012 **********  

  NOTE: A "FACTORY RECALL DEFAULTS" IS RECOMMENDED FOR THIS VERSION.
  AFTER THIS, DO NOT RECALL ANY PRESETS MADE WITH OLDER SOFTWARE

Please see the PDF file: "Nomad Manual Version 4.0 Update.pdf" for more information
  
 a red dot indicates the tracks that are being recorded on the CARD track home screen. 
 The meter strike-through has been enhanced to more easily see tracks that are note recorded.
  
 The HPH button can no longer be pressed for 1 second after entering home screen. 
 This prevents accidental HPH preset changes when aggressively navigating back 
 to a home screen.

 Added USB Debug Screen in the ADVANCED menu. 
 USB support exists in version 4.00 but requires programming of the USB option board.  
 More info on this feature will be coming soon.

 Added a CARD MIX TONE assign page in ENG Setup menu  allows all disk tracks to have tone

 Fixed folder naming to allow partially duplicated folder names.

 Added support for NomadLite and Nomad10 models. 
 
 Fixed ability to route an output track to a disk track (NomadLite and Nomad12 only).

 Changed FALSE START behavior to prevent accidentally deleting segments.

 LCD brightness setting has been adjusted to allow for the Bright screen modification.

 Dynamic 48V has been added to the ADVANCED SETUP page.  
    OFF means 48V behavior is normal (always on),  
    PowerSave means the 48V supply is only turned on when one or more 
     input channel have 48V turned on.  
    AutoKill turns off 48V when running on a low voltage power source (below 10V)
     to prevent possible damage to the 48V supply.

*********************************************************************************
  


*** MP3 support in v4.50 ***

On Nomads that have the USB option, MP3 files can be recorded along with the
normal audio onto the Primary card.  The MP3 files are created at the time of recording
to minimize the amount of time needed to mirror the MP3 files.

To try the MP3 feature, install 4.50 (or higher) and format the primary card (required 
to make room for the MP3 loop file).  Adjust MP3support to 64k, 96k or 128k in 
the MODE menu and in the ADVANCED menu insure the Processor speed is set to 1.

Record a few segments.  The MP3 option can create a mono mix of your mix tracks
as seen in the MP3MIX setting in the MODE menu.  The MP3 mixer will choose the
first 1 or two enabled record tracks or the last 1 or 2 enabled record tracks 
depending on your preference for where your mix track(s) are located.  Once you 
record a segment you cannot change the MP3 mix or MP3 bit rate setting for that 
audio segment since the MP3 file is crated at the time of recording.
 
Mirror the segments as you would normally but select MP3 as the file type in
the Mirror Menu instead of WAV POLY (Continuous mode is not available for MP3).

The MP3 feature records in a large (700Mbyte) loop onto the PRIMARY card.  This loop
will hold up to 24 hours of MP3 audio (at 64kbps). After 24 hours of audio has been
recorded the loop will restart and begin writing over the oldest audio segments.

This loop file can be seen on the PRIMARY card in the ZFILES folder and can act
as an emergency backup of audio in case the card is accidentally formatted or
a segment is erased inadvertently.

If you do not want a history of your audio to be left on the primary card, the only
way to remove it is to delete the MP3loop.mp3 file from the primary card (using a MAC or PC)
and then copy enough random data to the card to fill it up.  

::::::TWO sets of MIRROR SETTINGS:::::::
It may not be obvious that there are two independent MIRROR SETTINGS 
pages, one for USB and one for MirCF.  Changing the MirrorDrive to USB
or to MirCF selects which set of settings you see in the MirrorSettings page.  
Each set of settings is remembered independently so if you have the MirCF drive
set up to do POLY WAV and the USB drive setup to do MP3, when your change the 
MirrorDrive setting the mirror settings will also change appropriately.

This way if you want to mirror your MP3 files at the end of the day 
you just need to change the mirror drive from MirCF to USB turn on 
mirroring.






*** Input Trim Calibration ***

In version 5.23 an Input Trim Calibration mode has been added in the Advanced menu.
This allows users to generate a calibration table for each of the 6 inputs that will
allow the input trims to be more accurate.

If this procedure is not preformed properly it could make the input trims 
completely useless so perform this operation with care. Do not perform this
operation if you are in the middle of a job. If you cannot recover normal trim 
operation you may need to send the unit in to be re-calibrated which will not be
covered under warranty.

Here are the steps needed to perform the trim calibration:

Install version 5.23 or higher.

Perform a Factory Restore and re-start the Nomad.

Let the Nomad run for at least 15 minutes to warm up the the internal 
input gain circuitry to a level that will be common when used in the field.

Press the STAR key in the home screen to select the home screen containing 
2 output meters followed by 6 input meters. If the Nomad is not displaying
this EXACT screen while calibrating the process will fail.

Connect a cable from Output1 to Input1 and a cable from Output2 to Input2
This may cause full-scale feedback which is to be expected.

Turn on TONE by holding the TONE key.
Adjust the Out1 and Out2 output gain to -10dBu in the OUTPUT LEVELS menu.

Insure the tone level shows up on the inputs and does not clip 
when the input trim is turned up all the way. At the Maximum trim setting the 
input levels should be roughly at -10dB on the input meters

Go to the Advanced Setup menu and choose IN 1,2 in the TRIM CAL CHANS menu
In the TRIM CALIBRATE menu navigate to the GoNow selection.

Read the following instructions before performing them!

Press the STAR KEY. 
The "GoNow" text will change to "---" indicating the 
Calibration timer has started.

Quickly press BACK (HP) to get back to the home screen 
(the one containing 2 outs and 6 input meters).

Let the Nomad sit and in 20 seconds you should see levels
on the input meters creeping up every second as it calibrates
the input for every possible trim level.

Let the unit sit for a 5 or more minutes until the process stops.

Cycle power, turn on tone and check to insure the trims work.
With a trim of zero the input meter should show the tone at -35dB (plus or minus 1dB).

Move the cables to connect Out1 to In3 and Out2 to In4.
Choose the IN 3,4 selection in the TRIM CAL CHANS menu and 
repeat the process - a power cycle is not required between calibrations.
Do the same for Inputs 5,6.

In the end if you input tone at -20dB (with the output levels set to 0dBu) and
the Trim set to 0, the input meters should read close to -20dB.

If you install older software (5.16) the trims will behave in the 
old, uncalibrated manner.


-------------- USB keyboard shorcut list for NOMAD 12 ---------------

	v7.10: 
		END key goes to end of menu list

	v7.06:
		<< and >> keys (BUS and PFL) change playback segments in playback page (again)
		comma and period keys do the same as the << and >> keys in playback page 
		[ and ] keys control the SCRUB functions in the playback page
		Allowed FP8's STOP key to go to FALSE START page like the regular STOP key does

	v7.04
		Added MetaData page shortcut option to F1 key on FP8

		"Lock USB Keyboard" sequence:
			CTRL ALT DELETE = toggle lock/unlock
			CTRL ALT L = Lock
			CTRL ALT U = Unlock

	added CTRL-F1 = toggle MP3 mode (like AMIX key)

	allowed zero key on keyboard to select analog10 or zaxnet10 

    Ctrl R = RANSPORT_RECORD
    Ctrl S = TRANSPORT_STOP
    Ctrl P = TRANSPORT_PLAY, then goto PlayControl page
    Ctrl T = TRANSPORT_TONE
				
    F1 = Goto(&UISlateDisplay)   
    F2 = Goto(&UIMetaDataDisplay)
    F3 = Goto(&UIZNetChanX)      
    F4 = Goto(&UIBus)            
    F5 = 'KEY_PFL'
    F6 = Goto(&UISetupChanX)    
    -- same thing....
    T = Goto(&UISlateDisplay)   
    A = Goto(&UIMetaDataDisplay)
    Z = Goto(&UIZNetChanX) 
    B = Goto(&UIBus)       
    P = 'KEY_PFL'                      
    S = Goto(&UISetupChanX)
    
    Ctrl C = 'KEY_COM'     special handling in tasks.cpp and USBkeyboard.cpp      
    Ctrl L = 'KEY_SLATE'   special handling in tasks.cpp and USBkeyboard.cpp
  
    Ctrl + = 'Increment AutoPan  (only allowed in homes screens)
    Ctrl - = 'Decrement AutoPan  (only allowed in homes screens)
    
    F7    edit = 'metadata.scene'
    F8    edit = 'metadata.take' 
    F9    edit = 'metadata.note' 
    Alt S edit = 'metadata.scene'     
    Alt T edit = 'metadata.take'       
    Alt N edit = 'metadata.note'       

    KEY_HOME', goto = 'UIHome1' 
    M     = goto 'UIMainMenu'   
    H     = goto 'UIHeadphone1' 
    Alt H = goto 'UIHeadphone1' 
    Alt E = goto 'UIRecordEnables' 
    Alt M = goto 'UIMainMenu' 
    Alt K = goto 'UITrackNames' 
    F10   = goto 'UITrackNames' 
              
    KEY_GT (>) = HPHMem Increment
    KEY_LT (<) = HPHMem Decrement
                   
    '*' and PAGEUP increment home page variant
    
    PAGEDOWN decrements home page variant
    
    CTRL+'1 PFLtoggleChannel(A1) or therse can be Nomad fader assign dependant depending on mode
    CTRL+'2 PFLtoggleChannel(A2) 
    CTRL+'3 PFLtoggleChannel(A3) 
    CTRL+'4 PFLtoggleChannel(A4) 
    CTRL+'5 PFLtoggleChannel(A5) 
    CTRL+'6 PFLtoggleChannel(A6) 
    CTRL+'7 PFLtoggleChannel(A7) 
    CTRL+'8 PFLtoggleChannel(A8) 
    CTRL+'9 PFLtoggleChannel(A9) 
    CTRL+'0 PFLtoggleChannel(A10) 
    
    ALT+'1 PFLtoggleChannel(D1)  or these can be FP8 FADERS depending on mode
    ALT+'2 PFLtoggleChannel(D2)  
    ALT+'3 PFLtoggleChannel(D3)  
    ALT+'4 PFLtoggleChannel(D4)  
    ALT+'5 PFLtoggleChannel(D5)  
    ALT+'6 PFLtoggleChannel(D6)  
    ALT+'7 PFLtoggleChannel(D7)  
    ALT+'8 PFLtoggleChannel(D8)  
    ALT+'9 PFLtoggleChannel(D9)  
    ALT+'0 PFLtoggleChannel(D10)
